Quick Answer: What Can You Not Do After Getting Your Windows Tinted?

How long does tint need to cure?

approximately three daysCuring can take approximately three days in ideal weather conditions, so you will need to avoid rolling the windows up or down during this time.

However, temperatures and humidity can affect this curing time, which is why you need to carefully consider what time of year your windows are tinted..

Can you see at night with 20 tint?

tint shops will tell you 35% is a good mix for night and day driving, while still giving you a tinted look. A dark interior helps. 20% is about the max you can go and see well on a dark night.

Does tint get darker over time?

It doesn’t get any darker after it’s on. It will look darker as it’s dried but not noticeably darker. You need to look at least 15% if you want to go darker.. Even 20% isn’t dark enough.

How long do you have to wait to roll down windows after tint?

24 hoursDo I need to wait to roll my windows down? We recommend that you leave your vehicle windows rolled up for at least 24 hours after window film has been installed. This allows the film to cure and adhere to the glass before the window is moved.

How bad is it if you put your window down after tinting?

A common question from customers who have just put tinted windows on their car, is “Why Can’t I Roll Down My Windows After Tinting?” The answer is that the adhesives holding the tinted window film in place take time to dry, and until they do, friction caused by rolling down the window could scrape film from the glass.

Can I wash my car after tint?

The answer to this little conundrum is actually quite simple: No. You can wash your car to your heart’s content and never have to worry about the tinting in your windows. This is because when the tinting film is applied it is placed on the inside of car windows – not the outside.

Can I clean my windows after tinting?

At the same time, unless you choose a dark film, window tinting is nearly imperceptible. … When the film degrades, it won’t protect as it should and will no longer provide a clear, beautiful appearance. Since you want to protect your investment, be sure to clean tinted windows with gentle cleansers and soft cloths.

How do I know when my tint is cured?

During the curing process, you might notice a haziness or cloudiness to the tint film. This is a common occurrence and is caused by water. Firstly, when the tint has been applied a squeegee can only remove so much water. Afterward, the remaining water will form pockets underneath the film.

What percent is factory tint?

Generally, the factory window tint percentage ranges between 15% and 20 % on most cars. This means that the windows (usually the rare window) lets in just about the 15-20 % of visible light and deflect 85-85%.

What happens if you use Windex on tinted windows?

Don’t use windex on tint. It can break the tint down over time. It’ll start lightly flaking and turning purple, I did it to my first truck before I knew better. I suggest invisible glass.

What can you not do after window tinting?

Don’t roll down your windows that have been tinted for a week after your installation or longer, depending on the weather, when you have the tint installed. Do use soft cloths and squeegees to clean tinted windows. Don’t use razor blades, scrapers or abrasive cleaning compounds on tinted windows.

Is 35 percent tint dark?

A higher percentage indicates a greater amount of light coming through the windows, so a low tint percentage would appear much darker. … The common allowable limits are 50 percent for the driver’s front and passenger’s front window, and 35 percent for the rear passenger or side windows and the back window.

Is 30 percent tint dark?

If the window tint is from a respected brand (that is, one that does not embellish the technical specs of the tint), this will mean that the tint will have a transmittance of 30% for visible light (it will block 70% of the visible light that hits its surface).